1f9c670648
Kan ( #14776 )
...
* Add kan (ct)
* add: tarball mode
* Update kan-install.sh
* Update install/kan-install.sh
Co-authored-by: Tobias <96661824+CrazyWolf13@users.noreply.github.com >
---------
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
Co-authored-by: Tobias <96661824+CrazyWolf13@users.noreply.github.com >
Co-authored-by: CanbiZ (MickLesk) <47820557+MickLesk@users.noreply.github.com >
2026-05-29 11:04:49 +02:00
9a05da0b60
Add dynacat (ct) ( #14777 )
...
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
2026-05-29 10:41:19 +02:00
c3294436b5
Revert installation of EE ( #14784 )
2026-05-29 08:29:33 +02:00
f7224f3db8
minor fix
2026-05-28 10:07:01 +02:00
7703edf4b6
RomM: remove nginx default.conf during installation ( #14766 )
2026-05-28 08:33:16 +02:00
32f1956023
Yamtrack: migrate to uv ( #14767 )
2026-05-28 08:33:02 +02:00
d64b9f6878
Open-Archiver: replace pnpm approve-builds --yes with --all ( #14765 )
2026-05-28 08:31:12 +02:00
ceb50e3528
fix(hermesagent): set npm_config_yes=true to suppress interactive prompts during install ( #14763 )
2026-05-28 07:04:54 +02:00
9764462f06
fix(grist): restore install:ee step ( #14759 )
...
Re-applies the install:ee step removed in #13526 . The step was removed
when a transition from a repo to a tarball looked like the ee material
had been removed. Verified against grist-core v1.7.13.
See: https://github.com/community-scripts/ProxmoxVE/discussions/11203
2026-05-27 21:01:43 +02:00
0c8c11f6b4
MusicSeerr ( #14746 )
...
* Add musicseerr (ct)
* musicseerr-install.sh
---------
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
Co-authored-by: Michel Roegl-Brunner <73236783+michelroegl-brunner@users.noreply.github.com >
2026-05-27 11:07:29 +02:00
6a91a57cb2
Add hermesagent (ct) ( #14751 )
...
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
2026-05-27 10:06:21 +02:00
c6f2c2b7d0
Jackett: Remove quotes in Service File ( #14729 )
2026-05-26 09:19:18 +02:00
37649c1e0a
fix(open-archiver): approve pnpm build scripts before build:oss ( #14711 )
2026-05-26 08:04:15 +02:00
35cd953ed7
fix(docuseal): read Ruby version from Gemfile, upgrade on update if needed ( #14715 )
2026-05-26 08:03:20 +02:00
f9f21c1b79
fix(birdnet-go): install libonnxruntime.so from release tarball ( #14716 )
2026-05-26 08:02:55 +02:00
45953e857a
karakeep: fix: pip config ( #14703 )
...
* fix: pip config
* Create pip.conf if not present
2026-05-25 12:05:16 +02:00
4dc5dfb366
Add installation steps for Nginx mod_zip module ( #14678 )
2026-05-24 12:46:13 +02:00
e5c66aa4d2
Refactor ( #14673 )
2026-05-24 12:27:38 +02:00
7cfa47d138
fix(isponsorblocktv): detect CPU capabilities to select compatible binary ( #14677 )
...
Instead of hard-failing when AVX is not present, detect whether the host
CPU supports AVX + AVX2 + MOVBE (x86-64-v3 microarchitecture level) and
select the appropriate upstream binary accordingly:
- iSponsorBlockTV-x86_64-linux → modern CPUs (AVX/AVX2/MOVBE)
- iSponsorBlockTV-x86_64-linux-v1 → any x86_64 CPU (fallback)
The same detection logic is applied in update_script() so updates
stay consistent with the initially installed binary type.
Fixes: https://github.com/community-scripts/ProxmoxVE/issues/14660
Upstream: dmunozv04/iSponsorBlockTV#463
2026-05-24 12:26:18 +02:00
a73aefa8fd
IronClaw: Extra configuration during install to ensure Web Gateway can run ( #14635 )
...
* configure gateway during install for best chance of it not getting disabled
* add missing dbus-run-session on service
* add back chmod to .env file
* remove extra character
* add back mkdir for /root/.ironclaw
* remove erroneous msg blocks, service env values and tab in post completion gateway line
2026-05-23 10:13:57 +02:00
de2806ca54
wealthfolio: add: prebuild ( #14658 )
2026-05-23 09:48:03 +02:00
202f1c7e84
add: karakeep cli wrapper ( #14618 )
...
* add: karakeep cli wrapper
* Create /usr/bin/karakeep if it doesn't exist
* add: ejs for yt-dlp
* add: ejs for yt-dlp
* Fix pip install command for yt-dlp-ejs
* Fix pip install command to use STD variable
* rm python3 dep
* rm python3 dep
* ensure_dependencies
* add: deno
* add: deno
* rm: not needed msg block
2026-05-22 19:20:18 +02:00
563209cf87
OpenCloud: v7.0.0 changes ( #14650 )
2026-05-22 15:10:20 +02:00
d7c9065fc8
fix(the-lounge): install Node.js 22 before deb package ( #14648 )
...
The Lounge v4.5.0 requires nodejs (>= 22.13.0), which is not available from Debian 13 default repos. Install Node.js 22 via NodeSource before deploying the thelounge-deb package in both install and update scripts.
2026-05-22 23:04:04 +10:00
bacdd0b99f
bitfocus-companion ( #14603 )
2026-05-22 11:43:22 +02:00
8b80ab2534
Docmost: Fix duplicate STORAGE_DRIVER ( #14645 )
2026-05-22 11:05:53 +02:00
82abeac9fb
SoulSync: setup Node v22 and build WebUI ( #14639 )
2026-05-22 09:07:28 +02:00
35953b6d51
Refactor: Dispatcharr ( #14313 )
2026-05-22 09:06:48 +02:00
51468821f9
Profilarr: pin Deno version to v2.7.5 ( #14632 )
...
* Profilarr: pin Deno version to v2.7.5
* Update Deno version check and deployment
Pin Deno version to 2.7.5 to address known issue.
2026-05-22 08:51:43 +02:00
9d0c174de1
snowshare: use mv instead of cp for uploads backup to prevent disk fill ( #14558 )
...
* snowshare: use mv instead of cp for uploads backup to prevent disk fill
Replaces cp -a with mv when backing up and restoring /opt/snowshare/uploads
during updates. cp -a duplicated the entire uploads directory on each update,
which could fill the disk on instances with large uploads and left stale
backup directories accumulating across failed updates. mv is atomic on the
same filesystem and avoids any data duplication. Also clears any leftover
backup directory before the move to prevent nesting on interrupted updates.
Refs TuroYT/snowshare#258
* snowshare: use UPLOAD_DIR env to persist uploads outside install dir
Set UPLOAD_DIR=/opt/snowshare_data in the env file so uploads live
outside /opt/snowshare and survive CLEAN_INSTALL updates without any
backup/restore step. Existing installations are migrated on first
update by moving uploads to the new location and appending UPLOAD_DIR
to the env file, making the change non-breaking.
2026-05-21 23:07:16 +02:00
62b4b5f260
Profilarr v2: Update and Refactor whole Script ( #14584 )
2026-05-20 19:19:08 +02:00
56c97cdf80
typo
2026-05-20 15:53:29 +02:00
9ac2eda0bb
flowise add sqlite dep for newer version
2026-05-20 15:51:14 +02:00
f2266d8f53
flowise add pnpm global-bin-dir
2026-05-20 15:42:54 +02:00
d38c5ceb56
Update mylar3 to point to new Repo ( #14606 )
...
* Move mylar3 to new repo
* change form variabel to hardcoded
2026-05-20 14:34:22 +02:00
f0b1afca69
Ollama: Fix for latest version ( #14596 )
...
* fix
* oops
* Also in openwebui
* removed unused .ollama file
2026-05-20 07:34:03 +02:00
b8822e9123
Refactor ( #14594 )
2026-05-19 23:42:26 +02:00
b65bd1a8cb
Update SSL certificate paths in espconnect-install.sh ( #14591 )
2026-05-19 23:33:12 +02:00
afa59595f0
Add lobehub (ct) ( #14441 )
...
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
2026-05-19 08:50:45 +02:00
59d4ab70c3
ReactiveResume: set correct WorkingDirectory for systemd service ( #14579 )
...
* fix(reactive-resume): set correct WorkingDirectory for systemd service
* fix(reactive-resume): update WorkingDirectory in service for existing installs
2026-05-19 08:49:54 +02:00
7076d03ab3
Sparkyfitness: add missing nginx template variable substitutions ( #14578 )
...
* fix(sparkyfitness): add missing nginx template variable substitutions
* fix(sparkyfitness): regenerate nginx config during updates for existing installs
2026-05-19 08:34:52 +02:00
c874324f06
Wanderer: include dev dependencies during build ( #14577 )
...
* fix(wanderer): include dev dependencies during build
* fix(wanderer): remove --omit=dev from update script to allow npm run build
2026-05-19 08:34:28 +02:00
f7432990cf
Update nodejs Versions ( #14582 )
...
* Move fumadocs to node 24 per there package.json requirements
* Move papra to node 26 per there .nvmrc file
* Move zipline to node 24 as per there Dockerfile
2026-05-19 08:24:28 +02:00
4ffa551202
fix(whisparr): switch from nightly to stable GitHub release ( #14581 )
2026-05-19 08:21:07 +02:00
ade578edad
ESPconnect ( #14444 )
...
* Add espconnect (ct)
* update source
* Update author attribution in espconnect.sh
* Modify author info and remove SSL certificate creation
Updated author information in the script and removed self-signed certificate generation.
---------
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
Co-authored-by: CanbiZ (MickLesk) <47820557+MickLesk@users.noreply.github.com >
2026-05-18 20:04:19 +02:00
3a5f4454e6
Pangolin: bump to 1.18.4, fix missing statusHistory migration ( #14566 )
...
* feat(pangolin): bump to 1.18.4, fix missing statusHistory migration
* fix(pangolin): remove redundant msg_info in migration check
2026-05-18 20:01:55 +02:00
404463be21
degoog ( #14533 )
...
* Add degoog (ct)
* Update degoog.sh
* fix
---------
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
Co-authored-by: CanbiZ (MickLesk) <47820557+MickLesk@users.noreply.github.com >
2026-05-18 17:06:40 +02:00
1c216fc582
Bichon: Support v1 migration ( #14524 )
2026-05-18 16:43:44 +02:00
89025c9f28
Add webtrees (ct) ( #14532 )
...
Co-authored-by: push-app-to-main[bot] <203845782+push-app-to-main[bot]@users.noreply.github.com>
2026-05-18 15:52:58 +02:00
1a93de8674
dashy: fix yarn-missing on update and back up full user-data ( #14548 )
2026-05-17 20:32:12 +02:00
push-app-to-main[bot]